Parts of Harmonium

author
2 minutes, 21 seconds Read

Body – The body is the box that houses the various parts of the harmonium.  There are two basic styles.  One style is simply a box with everything in a fixed position (see above illustration).  Another style collapses down into a suitcase style of enclosure.  There are several collapsible styles; one is shown in the right hand illustration.

Bellows – The bellows are the pumps which force the air through the instrument.  There are really two sets of bellows, one internal and one external.  The external bellows are pumped by hand; these are familiar to the average player.  The external bellows then forces the air into the internal bellows.  The internal bellows act as a reservoir for the air.  These bellows lay deep inside the instrument and are visible only by disassembling the instrument.  The internal bellows push against a spring; it is this spring which forces the air over the reeds.

Keys – The keys, known in India as “chabi”, are the small wooden controls that the performer fingers to play the music. There are black keys and white keys. Although the keyboard is reminiscent of the keyboards found on pianos and other Western instruments, the international standard for pitch (i.e., A=440) has not been adopted.

Cover – The cover is a small piece of wood, sometimes with cloth or glass, which covers the workings of the harmonium. It serves two functions. The most important is to protect the workings against damage. It also changes the sound by muting the higher frequencies while allowing the lower frequencies to pass. Sometimes the cover has a sliding panel which makes this muting action adjustable.

Stops (main) – The main stops are a series of valves which control the way that air flows in the instrument. The main stops control the air flowing into the various reed chambers. There are usually a minimum of one stop per reed chamber; however it is not unusual to find more than one per chamber. Although these extra stops may control special functions, such as tremolo, it is not unusual to find a redundant stops with no special function. This reflects the tendency of Indian music­ians to sim­ply open up all the stops, re­gardless of the func­tion.

Stops (drone) – The drone strops are the most distinguishing feature of In­dian harmoniums. These stops con­trol the flow of air over un-keyed reeds. They sim­ply drone their par­ti­cu­lar pitch. There may be any num­ber of drones set to any pitch; how­ever they tend toward, A sharp, C sharp, D sharp, F sharp, and G sharp.

Handles – The handles allow for easy transport of the harmonium. In a box type, there are two handles on the sides. In a suitcase style, there is only a single handle.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *